The eps silo can improve the work efficiency of EPS mixer

Watch Youtube Video to seek for solutions about foam cutting machine and foam recycling machine
styrofoam silo
styrofoam silo
0
(0)

In order to improve the production efficiency, the installation of eps silo is arranged on the eps mixer so that there is always a batch of prepared eps materials waiting to be mixed, which can increase the production efficiency by 30%, so as to reflect the advantages of the high-efficiency of eps mixer. The eps material will form an air arch and it is not easy to unload. The eps silo must be equipped with a flow-aid air cushion or a vibration motor; for maintenance and sealing, the eps silo inlet must be equipped with a pneumatic or manual valve; for smooth feeding, the angle of the silo cone should not be greater than 60 degrees.

styrofoam silo
styrofoam silo

The crushing of eps powder generally adopts mechanical crushing, pneumatic crushing and vibration crushing inside China and abroad.

eps mixing machine
eps mixing machine

In order to fully reflect the advantages of the high-efficiency eps mixer, a pre-mix eps silo is added, and a vibration motor or flow-aid air cushion is configured according to the size of the silo to prevent material from bridging; a pneumatic butterfly valve is configured at the connection with the mixer, which has good sealing performance. It can effectively control dust during recycling work; the admixture feeding hopper is equipped with a dust collecting port, which solves the problem of dust flying when the valve opens.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Post

Be the first to comment

Leave a Reply

Your email address will not be published.


*