The cnc foam cutting machine takes multiple hot wires for cutting 2D models of architectural foam mouldings.The hot wires can shake from side to side with vibration.It has good advantages.
The main frame of cnc foam cutting machine is welded and assembled by rectangular square tubes, which can be disassembled and assembled freely, and it is firm and unchanging.
The working tableis equipped with a synchronous toothed belt driven by a stepping motor, a guide rail and a sliding block fixed on the guide rail, and the guide rail surfaces on both sides of the working table are processed by CNC machine and the gantry side plate and motor base are CNC Grinding machine finish machining to meet the running parallelism.
The working tablesurface is made by25mm polyester. It is finished with CNC milling, the deviation of 3000mm is ±0.5mm. The surface is resistant to moisture, damage, and deformation. Especially for the southern work surface, it will not bulge due to dampness and cause size differences.
Control system: It adopts a fully automatic industrialcontrol system and a domestic event-grade motion control card, which has fast response speed and strong anti-interference ability.
Software: The cnc foam cutting machine adopts the XP system or Win7 system. The system is equipped with CAD drawing software, and U disk input is also supported. You only need to input the required size and graphics into the CAD to generate the cutting machine graphics, complete the compilation process, and then generate the cutting machine code, which is directly converted to the CNC cutting machine for cutting use.
The software also has functions such as power-off memory, reverse cutting and rotation, mirror symmetry, gap compensation, automatic typesetting, travel protection, etc.
Item | Unit | CNCPSQ3000 | CNCPSQ6000 |
Cutting Size | mm | 3000*1250*1250 | 6000*1250*1250 |
Travel Distance -X axis | mm | 1800 | 1800 |
Travel Distance -Y axis | mm | 1300 | 1300 |
Cutting speed | M/min | 0-2000 | 0-2000 |
Power | kw | 7.3 | 7.3 |
Voltage | V | 380 | 380 |
Machine size | mm | 3000x2600x2500 | 6100* 2600* 2400 |
Overall weight | kg | 900 | 1100 |
Wire Oscillation | Optional | Optional |
The cnc foam cutting machine adopts electric heating wire when cutting. The purpose of using electric heating wire is: The heating wire has a long service life, low cost and easy to purchase. There will be no powder flying and order during the cutting process.
Performance advantage: stepper motor with first-line controller, good performance, super stable and high precision. Taiwan high-frequency hardening vacuum chromium plating/alloy ball screw/slider, stainless steel polished rod/linear bearing (y-axis), full bracket stainless steel guide/slider (cutting frame base), leveling feet, to meet the life of the bed.
CNC foam cutting machine can realize group operations and increase output. The cutting frame can hang multiple electric heating wires at the same time to process multiple products at the same time, saving benzene board waste, reducing costs and shortening the construction period.
Related Post
CNC Cutting And Drilling Machine
2019.02.10
What you need to know when operating eps cutting m...
2020.12.27
Recruiting Agent in Palau for EPS Cutting Machine ...
2019.02.17
How to choose among horizontal EPS mixer machines?
2021.01.28
Recruiting Agent in Saint Vincent and the Grenadin...
2019.02.17
Recruiting Agent in Niger for EPS Cutting Machine ...
2019.02.17
Leave a Reply