The EPS pelletizing machine may overheat sometimes,we need find out the problem,we list the causes as below:
Viscosity of lubrication oil is not match.Big viscosity can make big resistance.Small viscosity can make leaking possibility.So,choosing correct lubrication oil is important for eps pelletizing machine.
Oil tank is too small to take machine,if oil tank is small,the cooling unit will be small too which will be less cooling effect.so,it can make machine overheat.
Relief circuit problem can make machine overheat.Oil pump can not function with relief circuit,the high pressure can make oil leak.
EPS pelletizing machine is also named as eps granulator recycling machine, it includes eps shredder for eps foam waste, pipe, silo, strand die granulator main machine, water channel, cutter etc and also the eps shredder for hot melting ingot and eps shredder for cold compacted bricks based on your different feedings. The line is used for making recycled eps waste into particles which can be used as raw materials for making extruded polystyrene,picture frame,insulation materials,bill board,auxiliary materials etc products.
|
Model No.
|
220
|
270
|
320
|
350
|
|
Capacity (kg/h)
|
150-175
|
200-225
|
275-300
|
225-350
|
|
Motor power(kw)
|
800
|
800
|
1000
|
1000
|
|
Shredder power(kw)
|
5.5 four poles
|
5.5 four poles
|
5.5 four poles
|
5.5 four poles
|
|
Main unit power(kw)
|
15 four poles
|
15 four poles
|
18.5 four poles
|
22 four poles
|
|
Auxiliary unit power(kw)
|
5.5 four poles
|
5.5 four poles
|
11 four poles
|
11 four poles
|
|
Strand die power (kw)
|
2.2 six poles
|
2.2 six poles
|
2.2 six poles
|
2.2 six poles
|
|
Cutter power (kw)
|
1.1 four poles
|
1.1 four poles
|
2.2 four poles
|
2.2 four poles
|
Leave a Reply