plain shaft application on foam coating machine

Watch Youtube Video to seek for solutions about foam cutting machine and foam recycling machine
plain shaft
plain shaft for foam coating machine
0
(0)

The plain shaft can be good motion control for foam coating machine.It is adjustable position and guiding the foam motion.

plain shaft
plain shaft for foam coating machine

The linear plain shaft is a product that has the guiding function of the sliding bearing and can perform linear motion. The necessary conditions for these linear motion systems are: simple design, best execution ability, low maintenance costs, use of strict selection of durable materials, high-frequency heat treatment, accurate outer diameter, roundness, and straightness And surface treatment, etc.

foam coating machine
linear foam coating machine

Chrome-plated linear plain shaft

The chrome-plated linear optical axis is a layer of hard chromium plated on the basis of the ordinary linear optical axis, also known as the bearing rod, which can be used in a rust-prone environment or a bad environment. This axis is widely used For industrial robots, the moving part of the automatic sliding system device. : Suj2 (equivalent) national standard gcr15. Hardness: hrc60±2; hardened layer depth: 0.8-3mm; surface roughness: ra0.10m-ra0.35m straightness material.

application

Linear plain shaft is widely used in many linear motion systems such as cylinder rods, automatic precision printers, automatic cutting machines and industrial robots.

eps molding
eps molding

Feature of foam coating machine

1.       The position of mould on storage tank are controlled by special round screw with lateral rolling technology. It is good for the problem solving of the uneven thickness of cement layer.You can adjust the screw to solve the problem.The thickness deviation can be within 0.5mm.
2.       The mould of cement storage tank can be movable horizontally which is easier for the exchange of the mould. The exchange needs only 3 mins one time, same machines from other factories may need 30 mins.
3.       The position holding bar and guiding bar can make the eps mouldings enter smoothly.
4.       Sectional design of the mortar storage tank can be variable with different size of eps profiles.
5.       The sharp gear chain (single row gear, double row gears, wide row gear type are available) design can guarantee the movement consistency.it solves the skid problem when it drive big size eps profiles.
6.       Our machines are equipped with Delixi brand electronics.
7.        Custom size making are also available.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Post

Be the first to comment

Leave a Reply

Your email address will not be published.


*