Why you need hot wires oscillation on arduino CNC foam cutting machine

Introduction

The arduino CNC foam cutting machine is 2 axis machine which works withX axis ( table) move horizontally and Y axis ( hot wires ) move vertically to finish 2D shape cutting.

At the same time,the oscillation device on arduino CNC foam cutting machine can shake the hot wires from side to side.Oscillation function is optional for customers,you can have it or not with your own choice.

arduino controlled CNC foam cutting machine

Why you need oscillation?

The hot wire oscillation on arduino CNC foam cutting machine can give you more than what you expect.

* it can cut EPS styrofoam with water content which is not fully dried in drying room during

EPS insulation making process.

* it can increase cutting capacity by 1/3 .

* it has better cutting capability for cutting nonflammable eps styrofoam.

* it can cut 90` degree right angle as it is.

Technical Parameter

Model No.	Wire Oscillation	Cutting Length (mm)	Wire Length (mm)	Cutting Height (mm)	Wire Qty	Wire Travel Distance(mm)
						X axis	Y axis
CNCPSQ300	Yes	3000	1400	1350	24	1800	1300
CNCPSQ600		6000	1400	1350	24	1800	1300
CNCPSQ300	No	3000	1400	1350	24	1800	1300
			2200
			2600
CNCPSQ600		6000	1400	1350	24	1800	1300
			2200
			2600