Doubled capacity of Hot wire CNC foam cutting machine from China

On Sale: VCDS HEX-V2 Vag COM Cable USB Interface Only US$39.99, OBDII Break Out Box Only US$36.99. Wholesale 2019 Latest Desgin EPS Cutting Machines
cnc foam cutting machine
cnc foam cutting machine supplier
0
(0)

The CNC foam cutting machine is a new type of EPS foam cutting machine developed by our company for specific users. The cut shaped products have high precision and good quality; the finished EPS decorative mouldings are widely used in building decoration.

     Model No.
Wire Oscillation
Cutting Length
(mm)
Wire Length
(mm)
Cutting Height
(mm)
Wire Qty
Wire Travel Distance(mm)
X axis
Y axis
CNCPSQ300
Yes
3000
1400
1350
24
1800
1300
CNCPSQ600
6000
1400
1350
24
1800
1300
CNCPSQ300
No
3000
1400
1350
24
1800
1300
2200
2600
CNCPSQ600
6000
1400
1350
24
1800
1300
2200
2600
  1. The vibration wire can increase the capacity by 1/3.
  2. The 2.2m and 2.6m wire length can cut two blocks at the same time.

The PSQ600 CNC foam cutting machine for eps decoration is a key machine for making decorative mouldings. It adopts CNC software and laptop, and all stations are equipped with photoelectric sensor switches to realize the fully automatic operation of the whole machine.

cnc foam cutting machine
cnc foam cutting machine supplier

The hot wire CNC foam cutting machine has its mechanism of transverse cutting, vertical cutting, and cutting in their respective stations. 5 plates can be placed on the machine at the same time to process at the same time to achieve continuous cutting; to meet the specific requirements of users .

The CNC foam cutting machine adopts electric heating and automatic cutting, and the actual working voltage of the electric heating cutting wire is jointly controlled by a contact voltage regulator and a control transformer to perform three-dimensional cutting and control. The electrical device of the CNC foam cutting machine has a large installed capacity, and the actual working voltage is adjusted smoothly, continuously, and steplessly by a contact voltage regulator to meet different usage requirements.

CNC foam cutting machine
PSQ300 CNC foam cutting machine

The cutting frame adopts a fixed method. During the production process, the product runs at a computer-controlled speed, which reduces the time for board up and down and ruler alignment, and reduces auxiliary time in the production process; reduces the labor intensity of the operators and maximizes the production. effectiveness.

The CNC foam cutting machine adopts manipulator to automatically adjust the silk, with high precision. The silk adjustment time is 1-3 minutes, which is 10 times faster than manual silk adjustment. The accuracy is accurate; each station has a correction and pressing device, which is greatly improved, cutting accuracy is greatly improved.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Post

Be the first to comment

Leave a Reply

Your email address will not be published.


*