What are the typical insulation properties of EPS cement insulation bricks?

Watch Youtube Video to seek for solutions about foam cutting machine and foam recycling machine
0
(0)

EPS cement insulation bricks, also known as lightweight concrete bricks, offer insulation properties that make them suitable for thermal insulation applications. The specific insulation properties can vary depending on the formulation and manufacturing process by CNC foam cutting machine. Here are some typical insulation properties of EPS cement insulation bricks:

1. Thermal Conductivity: EPS cement insulation bricks have a low thermal conductivity, which means they are effective at reducing heat transfer. The thermal conductivity typically ranges from 0.1 to 0.3 W/m·K, depending on the specific composition and density of the bricks. Lower thermal conductivity values indicate better insulation performance.

2. R-value: The R-value measures the thermal resistance of a material. It represents the ability of the material to resist heat flow. EPS cement insulation bricks typically have R-values ranging from 1 to 3 per inch (25 to 75 mm) of thickness. Higher R-values indicate better insulation performance, as they indicate greater resistance to heat transfer.

3. U-value: The U-value is the reciprocal of the R-value and represents the overall heat transfer coefficient. A lower U-value indicates better insulation performance. EPS cement insulation bricks typically have U-values ranging from 0.33 to 1.0 W/m²·K. Lower U-values indicate reduced heat loss through the material.

4. Fire Resistance: EPS cement insulation bricks can also exhibit fire-resistant properties, depending on the specific formulation. The inclusion of cementitious materials in the mix provides some level of fire resistance. However, it’s important to note that the fire resistance of EPS cement insulation bricks can vary, and it is advisable to check with the manufacturer or supplier for fire rating information.

It’s important to consider that these insulation properties can be influenced by factors such as the density of the bricks, the thickness of the insulation layer, and the specific additives or coatings used in the manufacturing process by CNC foam cutting machine. Therefore, it’s recommended to consult with the manufacturer or supplier of EPS cement insulation bricks for detailed information on the insulation properties of their specific product offerings.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Post

Be the first to comment

Leave a Reply

Your email address will not be published.


*