Dual shaft eps regrinding machine can make eps styrofoam recycling with output eps beads under 2cm diameter.
Specification
Model no.
|
SW1000
|
SW1500
|
Inlet size
|
1000*800mm
|
1500*800mm
|
Motorreducer assembly power
|
3kw
|
5.5kw
|
Blower power
|
3kw
|
5.5kw
|
Rotating shaft qty
|
2 pcs
|
2 pcs
|
Output granules diameter
|
20mm
|
20mm
|
The eps regrinding machine is fully designed for recycling eps styrofoam waste with coordination of smaller diameter output and better capacity of eps shredding.The polystyrene waste will be reduced to nuggets which are to be sold or used again in package or board insulation line.The waste volume will be largely reduced by our eps recycling machine.
The eps regrinding machine is designed with two rotating shafts on top and one fixed shaft thing below the two shafts.The polystyrene waste will be rotating until it shred to size similiar to holes of screening mesh.
Cause the inlet is big size,so,it works well with different size of eps styrofoam waste like foam package,foam block,eps trimmings etc.
eps regrinding machine has below features:
1) Two rotating shafts and one fixed shaft.It is twin shaft eps regrinding machine.
2) The blade layout on the shaft are redesigned for recycling the size of eps styrofoam.
3) The size of blade on the shaft of two shaft eps shredder is just good for working with the machine.
4) Big power of motor reducer and blower on the eps shredding machine.
5) The eps regrinding machine height is good with the big power of machine,no materials can escape from inlet.
Related Post
EPS foam and its recycling machine
2021.02.24
hot wire vibration cutting line,NF eps foam cuttin...
2018.12.28
eps pelletizing machine with feeding of melt or co...
2020.11.16
The structural characteristics of CNC foam cutting...
2020.10.17
How US banknote excessive making affect ordinary p...
2021.05.29
vacuum block molding machine Generation III
2018.12.28