The EPS pellets machine line up with EPS crusher,silo,foam granulator,water tank,cutter,storage etc.Regular inspection is required for all machines, and the foam granulator is no exception. In addition to checking the firmness and looseness of various parts, attention should also be paid to checking the wear of wearing parts. If the wear is serious, it should be replaced in time to avoid Damage major components.
During production, uniform feeding should be maintained to crush the melting quality and normal production. At the same time, overloading of the motor is strictly prohibited. Under normal circumstances, do not arbitrarily change the size of the feeding outlet.
Due to the high speed, in addition to the correct and firm installation, good lubrication should be maintained to maintain the normal operation of the machine. Under normal circumstances, the bearing temperature does not exceed 70 degrees, which is normal. Add butter to the bearing of the main engine once a week, and pay attention to avoid using inferior butter.
When the equipment leaves the factory, the motor pulleys and pulleys are all ready. Do not change them at will, because changing the size of the pulleys will directly affect the speed of the machine. Under normal circumstances, a difference of 8-10% from the rated speed has no major impact.
After the foam granulator is started, it is not allowed to disassemble or inspect any part inside the machine. All kinds of tools should not be placed randomly on the machine. When an abnormal sound is heard, it should be stopped immediately, and the maintenance can be carried out after the machine is stopped stably. .
Check and clean up in time, clean the machine in time after the work every day, especially the melt in the barrel should be completely pushed out before shutting down the main machine.