The EPS decorative moulding are installed on the buildings walls,it is coated with plaster/mortar by foam coating machine.You will need ask a question:what thickness of the coatings are there?
It is commonly coated with 2mm to 4mm thickness.Thickness of coating material is as much as space between model moulds and the surface of foam moulding which had been cut.
The surface of decorative moulding will be coated with this foam coating machine to protect the building surface from corrosive weather conditions like rain,hail,storm and temperature difference.
Linear foam coating machine works on coating cement on the surface of eps foam moulding.The motor motions the chain to drive the eps moulding on the chain thru the mould in the middle which is filled with cement. Bigger coating width requires stronger chain drive. Mould size can be adjustable by ball type screw.
|
Machine Model No.
|
CF1200
|
|
Working width
|
1200mm
|
|
Working height
|
600mm
|
|
Max working speed
|
20m/min
|
|
Voltage
|
380v
|
Related Post
fast wire foam cutting machine from China
2021.11.26
Vibration problem during EPS shredder working
2021.01.28
sponge cnc horizontal vibration blade cutting mach...
2018.12.28
Points for attention about hot wire cutter
2020.11.5
introduction of linear foam coating machine
2020.12.16
basic configuration eps foam batch prefoam machine
2018.12.28