How to choose among horizontal EPS mixer machines?

On Sale: HEX V2 Only US$39.99, GOLO 3 Only US$36.99. Wholesale 2019 Latest Desgin EPS Cutting Machines

At present, foam insulation plants mostly choose to buy China made horizontal EPS mixer, but experts suggest that when foam plants choose foam EPS mixer, they should choose screw type horizontal eps mixer. This machine has high mixing efficiency, good mixing quality, short discharge time, and less residue. . However, the following points should be paid attention to when choosing and using a horizontal EPS mixer:

  1. Choose the horizontal EPS mixer according to the daily output. Since the processing time of each batch of EPS styrofoamin the mixer is about 6 minutes, plus the time of discharging and feeding, the processing time of each batch of EPS styrofoamcan be calculated as 10 minutes, and 6 batches of EPS styrofoam can be processed in 1 hour. If you choose a EPS mixer with a processing capacity of 100 kilograms per batch, it can process 600 kilograms per hour. Users can choose horizontal EPS mixer according to their needs.
  1. According to the working principle of the horizontal spiral belt EPS mixer, the ability of the double spiral belt for mixing and mixing to push EPS styrofoamin the opposite direction should be basically the same. Since the pitch of the inner spiral belt should be smaller than that of the outer spiral belt, in order to achieve the same ability to push EPS styrofoam, the pitch of the inner spiral belt should be smaller than the outer spiral belt, and the width should be greater than the outer spiral belt, otherwise the EPS styrofoamwill be concentrated in one direction. Therefore, pay attention to this when choosing a horizontal EPS mixer.
  2. According to the design principle, the gap between the spiral belt and the shell in the spiral belt EPS mixer can be 4 mm to 10 mm, and the EPS styrofoamcan be driven by friction to participate in the mixing.

However, due to the difference in the crushing particle size and the friction coefficient of the EPS styrofoam, the time for the EPS styrofoam of various components to participate in the mixing will be different.Some manufacturers have realized this and improved their products. One is to pay attention to the machining accuracy to reduce the bottom clearance to 1 mm to 2 mm; the other is to make the position between the spindle and the housing adjustable, and the spiral belt and the housing can be adjusted frequently according to the amount of wear Clearance. When choosing a EPS mixer, these two types of products are good choices.

Machine parameter

Working size
Total size
380V 3 phase 50Hz
380V 3 phase 50Hz
  1. When choosing a horizontal spiral belt EPS mixer, pay attention to the discharge method.

Should choose the form of wide opening, do not choose the discharging form of side or small opening at the bottom. The reason is: when the EPS mixer completes the mixing and mixing in the specified time, the uniformity of the material can be ensured by clearing at one time; if the spiral belt with side openings or small openings at the bottom is used to gradually clean, the first is that the time is delayed and the expected productivity is not reached. The foam material has already reached a certain degree of uniformity. Excessive stirring will cause the material to separate and destroy the uniformity, thus losing the meaning of choosing a horizontal eps mixer.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Post

Be the first to comment

Leave a Reply

Your email address will not be published.