Many people want to buy a foam router machine, but do not know how to choose. Questions such as the selection of the spindle power of the CNC router machine are a very difficult problem. Today we will teach you how much power is appropriate for the spindle of the foam router machine.
No matter what material is engraved, the power of the main shaft of the router machine, relief, hollowing, cutting, router and other processing effects are selected according to the processing effect, and the main power is also different. Generally speaking, it is better to have a higher power. The actual power consumption of the motor is related to the load. Therefore, for the router machine spindle, under the same load, the actual power consumption of the large and small power spindles is not very different. But due to the larger rotating weight and bearing size, the higher power will be slightly lower than the lower power at high speeds. Generally speaking, it is best to meet the needs. The actual power consumption of the motor is related to the load. Therefore, for the spindle of the foam router machine, under the same load, the actual power consumption of the spindle with large and small power is not much different. Therefore, before selecting a spindle, the required high speed should be clearly defined.
Let’s talk about the reasons for the failure of the spindle of the foam CNC router machine. The first reason is the quality of the spindle of the router machine, that is, the quality of the spindle itself is not up to standard, resulting in bearing damage. Bearings with poor quality will have a short life and be easily damaged when the router machine spindle runs at high speed. The second reason is that the router spindle cooling system has no consequences. The main shaft of the router machine has a water circulation system for water cooling. If the temporary water circulation is not good, the boiling water circulation may be forgotten. Over time, thermal effects will occur, resulting in increased friction and bearing damage.
Leave a Reply